Chickens are increasing in popularity with many residents, and for good reason. Owning poultry provides a source of fresh eggs, and is fun. At some point, you may have questions while you are home with chickens
UConn Extension, part of the UConn College of Agriculture, Health and Natural Resources has a suite of resources for poultry owners. Videos, fact sheets and advice from our educators can help new chicken owners or seasoned poultry professionals enhance your skills and improve the health and wellbeing of your chickens.
Our poultry care video series with retired Extension Educator Dr. Mike Darre from the UConn Department of Animal Science can answer many of your questions. There are 10 videos:
How to hold your birds,
How to inspect your birds,
Determining if your chicken is a good layer,
Fact sheets on small flock management and poultry health issues are available on the poultry science section of our animal science publications. Links to other poultry resources are available on this site as well. Information covered includes breeds of chickens, coop designs, scaling up egg production, managing guinea fowl, and cleaning and disinfecting your poultry house, among others.
If you still have question, you can submit them online and one of our Extension Specialists will provide you with answers and additional resources. Submit your question at: https://bit.ly/AskUConnYourQuestions. You can also share your experiences and photos of your flock on social media with our hashtag, #HomeWithChickens.
UConn CAHNR Extension has more than 100 years’ experience strengthening communities in Connecticut and beyond. Extension programs address the full range of issues set forth in CAHNR’s strategic initiatives:
Ensuring a vibrant and sustainable agricultural industry and food supply
Enhancing health and well-being locally, nationally, and globally
Designing sustainable landscapes across urban-rural interfaces
Advancing adaptation and resilience in a changing climate.
Programs delivered by Extension reach individuals, communities, and businesses in each of Connecticut’s 169 municipalities.
There are several basic needs that need to be provided for poultry. These are feed, water, fresh air, light, darkness, proper thermal environment, protection (from the elements, predators, injury and theft) and proper space. Proper housing and equipment will take care of many of these items. Poultry and other animals function normally when they exist in harmonious balance with the other living forms and the physical and chemical factors in their environment. Therefore, it is the role of the poultry owner to properly manage the animals in their care.
Poultry require a dry, draft free environment. Depending upon the number of birds to be housed, almost any type of building that provides controlled ventilation, such as windows and doors, can be used. Birds should be reared in high, well drained areas. The windows of the coop and, outside run should face south to allow maximum exposure to the sun throughout the year. This helps with warmth in the winter and dryness during the rest of the year.
If you are building new, consider a concrete floor and starting your walls with two concrete blocks. This will prevent rodents, snakes and other predators from digging under the walls and floors for entrance into the coop. If you use plywood for floor construction, consider using two layers of 3/4″ CDX plywood, with a layer of 1/4″ or 1/8″ galvanized wire mesh between the layers, then raise the floor off the ground with posts or 6″ x 6″ runners. Using runners allows you to move the coop as needed. Being off the ground also helps prevent rot and moisture in the coop. All this helps prevent predators from chewing through the floor. Some have found that using the double layer of plywood with wire mesh and insulation between the layers helps keep the coop warmer in the winter. Windows should also be covered with wire mesh to keep wild birds and other predators out. For summer, a wire mesh screen door helps keep the coop cooler at night.
Ventilation provides comfort for the birds by removing moisture, ammonia and other gases; provides an exchange of air and helps control the temperature of the pen. You can use natural or gravity fed ventilation with windows, flues and slats. Or you can use forced air ventilation if you have a larger number of birds. In a small coop (less than 150 sq ft of floor space) you can use a bathroom fan in the ceiling and slats in the walls or windows to remove excess moisture in the winter, much as it does in your home. It is important to remove excess moisture and ammonia from the coop, especially in cold weather when ventilation is at a minimum.
For predator protection, keep your birds confined with fence and covered runs. Outside run fencing should be buried at least 12″ to 18″with an 6″ to 8″ “L” or “J” to the outside, backfilled with rocks and soil to prevent digging predators. To prevent problems with flying predators, cover your outside runs with mesh wire or netting. A 3-4 ft. grid over the pen made from bailing twine has also proven effective against flying predators. A good outside run can be made by digging 12-18” with a slight slopeaway from the coop, and laying plastic sheetingdown (if you don’t have good drainage) with a drain pipe at the end to catch runoff. Add 4-6” of sand, cover with 1⁄4” wire mesh, add 4-6” of coarse gavel, cover with 1/4” wire mesh and topwith 4-6” of pea-gravel. Put a barrier around therun of 2×6” to keep the gravel in place. Or youcan use a good ground cover of millet, broomcorn, sorghum or other tall leafy vegetation which provides hiding space for the birds.
Birds need adequate space for feeding, exercise, breeding, nesting and roosting.
Minimum Space Requirements
Roosts: Provide chickens with 6-10 inches of roost space per bird. Round roosts are the best, and a tree branch of about 1″ to 1.5″ in diameter works well. Meat birds and waterfowl do not require roosts.
Nests: It is best to provide one nest box for each 4-5 females in the flock. 12-14” cubeswith front open with perching space for the birds to stand on while entering the nest.
Floor material: Litter floors of wood shavings is the best. Wood has an excellent capacity to absorb moisture and then re- release it into the air. Whatever you use, keep it clean and dry.
FEED AND WATER
Birds need free access to fresh feed. Feeders can be made of wood, metal, or plastic, but it is important to provide about 2-3 linear inches of feeder space per bird and up to 6″ for meat type birds and turkeys. They should be adjustable in height so the lip of the feeder will be at the level of the back of the bird when standing. Keep troughs only half full to prevent feed wastage.
Fresh water should always be available to your birds, inside or outside. If using an open waterer keeping the lip of the waterer level with the back of the bird is essential. For winter watering, metal waterers can be placed on low temp heaters, keeping the
water at about 50oF. However, nipple waters are the best, since the birds cannot produce suction in their mouth. I recommend them over any open watering system. Use of a fish tank heater in buckets used for nipple waterers helps prevent freezing in the winter.
Commercial poultry feeds have been specially formulated for the type and age of your birds and are the best source of nutrition for your birds. For egg layers, a 14 or 16% CP laying mash or crumbles can be fed from the first egg until out of production. Chicks should be fed a 18-23% CP medicated starter, unless they received cocci-vac, then use a non-medicated starter feed, for six weeks. Then put on a 16-18% CP layer grower feed till 15 weeks or first egg, then on to the layer feed. Broilers should be feed a broiler starter (21-23% CP) feed for 3 weeks, and a 18-20% CP grower/ finisher till market.
Poultry require artificial lighting to maintain egg production during the short days of winter. Poultry are long-day breeders and we normally provide laying hens about 16 hrs of light per day throughout the year. Light timers set to come on at 5 am and off at 9 pm will supply the hours required. Low wattage CFL, LED or Incandescent lamps that supply about 1 foot candle of light at bird level is adequate. Use a 2700K lamp.
Never decrease the hours of light on laying hens or increase the hours of light on a growing bird.
Raising and brooding baby chicks requires special care. Chicks need to be reared in isolation for disease prevention. They should be reared in a clean, disinfected environment. Baby chicks cannot properly regulate their body temperature for a few days after hatching and require a heat source. Heat lamps, brooder stoves, hovers and infrared heaters work well. A brooder guard, a ring of cardboard or plastic at least 18″ high on the floor circling the heat source keeps the chicks from getting too far from the heat and reduces drafts. Watch the birds, if they huddle under the heat source, they are too cool, if off to one side, a draft, if spread evenly, just right. For newly hatched birds is it best to provide them with water for the first couple of hours before giving them solid feed. This helps clean out their excretory system. If you get chicks from a distant hatchery through the mail, then give them a 5% sugar water solution for the first few hours to boost their energy level.